Station Master PRO can now connect to networked Icom Radios and compatible servers (such as an X6100 "wfserver")
To connect to these radios select "ICOM Server" from the Rig Type menu then enter USER:PASS@IP:PORT in the port section.
Please leave all the ports as default on the radio, the default main port is normally 50001
This will now connect to your networked Icom - note that at the time of posting this post you do not get audio so you cannot use this for full remote control However that functionality is coming very soon and may have already been implemented.
Please ensure your VPN is off and that your radio is connected to the same network as your computer.
Refer to your radio's manual on network connections to learn how to use this feature and create accounts.
Also:
- The waterfall must be visible on the radio (no menus open)
- Set waterfall to "FIX" mode (not CENTER), this stops the waterwall moving
- Set waterfall bandwidth to the highest level (this gives you the best resolution waterfall in Station Master)
Once you have the rig connected:
Open Station Master
Click Rig Control -> Start
Click Rig -> ICOM Server (or similar)
Click Scope -> ICOM Server (or similar)
You may need to right click over the SCOPE in SM and turn UP the Level and Speed to see the waterfall, don't turn the speed up too much as it will look very pixelated.